GPM RACING BRASS AXLE WEIGHT 450g HEX ADAPTER TRAXXAS TRX-4 UPGRADE PARTS

BRASS PENDULUM WHEEL KNUCKLE AXLE WEIGHT + 23MM HEX ADAPTER -2PC SET

Part Location: Outer case of the front & rear knuckle arms, install on 23mm hex

Product major functions & usage:
To increase the weight of each wheel to stabilize the wheel, enlarge the angle of crawling, especially when the car is digging into some low lying area land spaces, grab the ground firmly and smoothly drive back to level.

Accessories:
Pendulum Wheel Weight 2pcs
23mm Hex Adapter 2pcs
M4x2.5×11 Screw Pin 2pcs
5mm Spring Steel Shims 2pcs
5mm Metal Washer 2pcs
20mm Stainless Steel Hex Socket Screws 2pcs

Major advantages of upgrading to this part/product :
This part is designed with a bearing in the middle with a Delrin collar, the weighted pendulum is made narrower on the top and wider at the bottom to allow the vehicle to crawl at different angles. The additional weight is kept downwards so the crawler is more grabby to the ground and able to crawl at a larger angle.

Other special notes and comments:
1. This part is designed uniquely by GPM to install on the outer drive portal to guarantee the gravity of the chassis stays heavy and low.
2. Weight of single pendulum + hex: 225 grams
3. The 23mm widen hex is 18mm wider than the original
4. This product must be used with wheels with an inner diameter of 58mm and the threaded hole of the wheel must be 5mm.

Weight.: 480g

Suitable Model :

•  TRX-4  & TRX-6 MODELS

Get the best RC Car Upgrade Parts today!

If you have any questions about our products or service details, please feel free to message us on Facebook Live Chat 

also don’t forget to join our Facebook! group